Termites in a wall: how to spot them and what to do next
The wall looks fine. The frame behind it may not.
Why walls are such a good hiding place
A wall cavity is dark, sheltered and full of timber. For termites it is close to perfect. They can travel up the inside of the frame, feed on studs and plates, and never show themselves in a room.
That is why termites in a wall are so often found late. The first sign is usually a symptom, not the insect.
Signs of termites in a wall
Look for several of these together. One alone rarely settles it.
- Paint that bubbles, blisters or ripples without any obvious leak.
- Skirting boards or architraves that sound hollow or feel soft.
- Thin mud tubes rising from the floor, slab or a pier towards the wall.
- Door frames or window frames that start to stick.
- Tiny piles of what looks like fine soil or mud near the base.
- Winged termites, called alates, turning up near a light or window sill.
Alates are the winged reproductives that leave a mature colony. Seeing a few indoors is a warning. The detail is in early warning signs of termites.
Do not cut the wall open
It is tempting to grab a hammer or a hole saw. Resist it. Breaking into a wall disturbs the colony, and disturbed termites seal that gallery and move to another. The activity then continues behind a part of the wall you cannot see.
It also destroys the evidence. An inspector reads the pattern of galleries, mud and damage to work out where the colony is entering. Take that away and the search gets harder.
Why spraying the wall makes things worse
A can of supermarket spray reaches the surface and little else. The colony is somewhere else, usually in soil or in another part of the structure. Spraying chases it deeper and can wipe out the transfer effect that professional non-repellent products and baits rely on.
In Australia, termiticides are registered by the APVMA and applied by a licensed pest management technician. That is not a formality. It is how the product actually reaches the colony.
What an inspector does with a suspect wall
A timber pest inspector uses sounding, a moisture meter and sometimes a thermal camera or a probe that detects movement. These tools check the wall without demolishing it. The result is a written report that follows the relevant Australian Standard.
If you are curious about the process, read what is a termite inspection. Ask the inspector what could not be accessed, because areas behind fixed lining are often limited.
Can you repair it yourself afterwards?
Only after the colony has been dealt with, and only for cosmetic timber. Studs, plates and lintels are structural, and an engineer should judge them before anything is cut out. Fixing a wall while the colony is still active often means paying twice.
What to do, in order
- Leave the wall exactly as it is.
- Photograph what you can see, with the date.
- Book a licensed timber pest inspector.
- Let a licensed pest management technician manage the colony.
- Plan repairs only afterwards, with an engineer if the frame is involved.
The repair sequence is laid out in fixing termite damage: what happens first. A suspect wall is worth an inspection this week, not at the end of summer.
Frequently asked questions
Can termites live inside a wall?
Yes. Wall cavities are sheltered and full of timber, so termites can feed on studs and plates without ever showing themselves in a room.
How do I know if there are termites in my wall?
Look for bubbling paint, hollow-sounding skirting, mud tubes and winged termites near the wall. These are clues, and only an inspector can confirm what is behind the lining.
Should I open the wall to check?
No. Cutting in disturbs the colony and destroys evidence. A licensed inspector can check the wall with sounding, a moisture meter and other tools.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Queensland Building and Construction Commission. Protect against termites: termite management systems and inspections
- Department of Health, Victoria. Pest control: termites
- Standards Australia. Australian Standards (AS 4349.3 timber pest inspection, AS 3660 termite management)