Termite wood damage: what it looks like and what to do next
The timber looks fine from outside. That is the problem.
What termite wood damage actually is
Termite wood damage is timber eaten from the inside. Workers chew along the soft grain and leave a thin skin of wood or paint at the surface. The board looks intact until something presses on it.
That is why most people find it by accident. A screwdriver goes in too easily, a skirting board dents, or a door frame sounds papery when tapped. By then the colony has often been feeding for a long time.
Signs that the damage is termite work
No single sign proves it. Several together point strongly that way.
- Timber that sounds hollow or papery when tapped with a knuckle.
- Galleries running with the grain, usually lined with a soil-like or mud-like material.
- Blistered or bubbling paint, or fine cracks along a board.
- Mud tubes on walls, piers or foundations, which are the colony's covered travel routes.
- Doors and windows that start to stick for no clear reason.
Pictures of the damage are in what termite damage actually looks like.
Why a surface check misleads you
Looking at a board tells you almost nothing. A stud can be a hollow shell and still carry a coat of paint. So a clean-looking wall does not mean clean framing, and a small hole does not mean small damage.
Extent is the question that matters, and only a trained eye with the right tools can answer it. Moisture meters, sounding and sometimes thermal imaging all help. They are part of a proper termite inspection.
Do not break it open and do not spray it
This is the most important rule on the page. Leave the damage alone until a licensed pest management technician has seen it.
Breaking into a gallery disturbs the colony. Termites that are disturbed seal that route and move to another one, often somewhere you cannot see. Spraying a supermarket insecticide does the same, and it can destroy the transfer effect that professional non-repellent products and baits rely on. It also wipes out the evidence the inspector needs to find where the activity comes from.
If you have already poked a hole, do not panic. Stop, leave it as it is, and book an inspection. Photograph it first if you like.
Is it termites, borers or rot?
Several things hollow out timber, and they are not treated the same way. Fungal decay leaves wood soft, dark and often cubed. Borers leave small round exit holes and fine powder called frass. Termites leave galleries with soil-like lining and rarely any sawdust.
You cannot reliably tell them apart by eye, and identifying the exact species from a photo is not possible. The inspector decides. The rot side of the question is covered in reading soft timber.
Cosmetic or structural?
Damage to skirting, architraves and cabinetry is cosmetic. Damage to bearers, joists, studs, plates or rafters is structural. The second kind needs an engineer's opinion before anything is cut out, because nobody can judge remaining strength by eye.
What to do, in order
- Stop touching the damaged area.
- Book a licensed timber pest inspector. Ask for an inspection that follows the relevant Australian Standard.
- Let the licensed technician manage the activity.
- Only then plan repairs, with an engineer where the structure is involved.
The full sequence is in fixing termite damage: what happens first. Repairing before the colony is dealt with usually means paying twice.
Does insurance help?
Most standard home policies exclude termite damage. Check your own policy wording with your insurer, because this guide cannot read it for you.
Frequently asked questions
Can termites damage wood without me seeing it?
Yes. Termites eat the inside of timber and leave the surface intact, so serious damage can sit behind paint, lining or flooring for a long time.
Should I remove the damaged wood myself?
No. Removing it disturbs the colony and destroys evidence. Have a licensed pest management technician inspect it first.
Is hollow-sounding timber always termites?
No. Rot, borers and moisture damage can also make timber sound hollow or soft. An inspector has to confirm the cause.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Queensland Building and Construction Commission. Protect against termites: termite management systems and inspections
- Department of Health, Victoria. Pest control: termites
- Standards Australia. Australian Standards (AS 4349.3 timber pest inspection, AS 3660 termite management)