What is a termite inspection?
It is a visual check on one day, not a treatment and not a guarantee. Here is what to expect and how to make it count.
A termite inspection is a trained person looking, on one day
A termite inspection is a visual check of your building by a licensed inspector. They look for live termites, mud tubes, damaged timber and the conditions that invite a colony in. The result is a written report.
That is all it is. It is not a treatment and it is not a guarantee. It tells you what could be seen and reached on the day, and nothing more.
What happens when the inspector arrives
Most inspections follow the same order. The inspector walks the outside first, then the interior, then the roof void and the subfloor if you have one. Each area is checked for the same few signs.
- Mud tubes on walls, piers, slab edges and fences.
- Damaged timber that sounds hollow when tapped or looks blistered under paint.
- Discarded wings near windows and door frames after a swarm.
- Moisture from leaks, poor drainage or blocked vents, which termites follow.
- Timber touching soil, such as stumps, fence posts and stored wood.
Expect the visit to take a while on a large house, and expect questions. Tell the inspector about past termite activity, old treatments and any renovation that covered timber.
Why an inspection is not the same as a treatment
People often ring a pest company expecting one visit to solve everything. An inspection finds evidence. A treatment is a separate job, done only by a licensed pest management technician using products registered by the APVMA.
If the inspector finds activity, the next step is a plan for that building. It is not something you start yourself.
What you should do if you see evidence first
Sometimes you spot a mud tube or a hollow skirting board before anyone arrives. Leave it alone. Do not break the tube, do not spray it and do not pull the timber apart.
Disturbing the workings makes the colony close that route and come back through a hidden one. It also destroys the evidence the inspector needs to read. Photograph it from a distance, note where it is, and book a licensed inspector.
Making the visit more useful
You cannot change the standard, but you can change how much the inspector can reach. Clear a path to the subfloor hatch and the roof access. Move stored boxes away from walls. Cut back garden beds that cover the slab edge.
Every area the inspector cannot reach goes on the report as not inspected. That list is the part worth reading first, and the fix is often free.
What the report will and will not tell you
A clear report means no evidence was found in the accessible areas on that day. It does not mean termites will never arrive. Termites keep searching, so a clear result today says little about next year.
That is why inspections repeat on a schedule. Our guide to how often to inspect covers the interval, and what an inspection covers goes through the limits in more detail.
Who is allowed to do one
Rules differ by state, and some states license inspectors separately from technicians. Ask to see the licence and check it with the state regulator before you book. Our page on pest control licences by state explains where to look.
Be wary of anyone who offers to inspect and treat in the same breath, then pushes a treatment before showing you the evidence. You are entitled to see what they found.
When an inspection is worth booking
Book one before you buy, before you sign off a renovation that will cover timber, and on the schedule your barrier or warranty sets. Book one sooner if you have found wings, tubes or hollow timber.
If none of those apply and your last report is recent, do not rush. A second inspection a month after a clear one adds very little. Put the money toward fixing what the report flagged, such as a leaking tap or a blocked subfloor vent.
Keep every report. A run of clear reports over the years is useful evidence of care when you sell. And a gap in the run is a question a buyer will ask.
Frequently asked questions
Is a termite inspection the same as a treatment?
No. An inspection looks for evidence and writes a report. A treatment is a separate job, done only by a licensed pest management technician using registered products.
Do I need to be home for the inspection?
It helps. You can point out past activity and make sure the inspector can reach the subfloor and roof void. If you cannot attend, arrange access beforehand.
What should I do if I find termites before the inspector arrives?
Leave them alone. Do not break tubes or spray. Photograph from a distance and tell the inspector, who needs the evidence undisturbed.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Standards Australia. Australian Standards (AS 4349.3 timber pest inspection, AS 3660 termite management)
- Queensland Building and Construction Commission. Protect against termites: termite management systems and inspections
- Department of Health, Victoria. Pest control: termites