How long a termite inspection takes, and what slows it down
A short visit is not always a good one. What decides the time on site, and how to tell a rushed inspection from an efficient one.
The short answer
A visual termite inspection of an average house usually takes somewhere around one to two hours. A small unit can be quicker. A large house with a subfloor, roof void and outbuildings takes longer.
The time on site matters less than what the inspector actually reaches.
What sets the time
- Size and layout. More rooms, levels and outbuildings mean more to check.
- Access. A tight subfloor or a roof void with no clear path slows everything.
- Clutter. Furniture and stored items against walls hide the spots that matter.
- What is found. Evidence takes time to trace and record properly.
When a quick inspection is a warning sign
A fifteen minute walk around the outside is not an inspection of a whole house. Take a side here: if the inspector never entered the subfloor or the roof void and gave you no reason, ask why.
A good inspector will tell you up front what they can and cannot reach. If they skip a hard area, that should appear in the limitations of the report, not be left out.
How you can help it go well
- Clear access to the manhole, subfloor hatch and any locked rooms.
- Move stored items away from walls where you can.
- Tell the inspector about past moisture problems, previous treatments or timber damage.
- Be at home, or arrange access, so nothing is marked as inaccessible.
What the time does not cover
Even a long visit is a visual inspection. It cannot see through plasterboard or inside solid timber, and some tools only add a little more. See what inspection tools can and cannot show.
If the inspector finds something
Do not break the tubes and do not spray anything. It makes the colony shift and re-enter out of sight, and it wipes out the evidence. Photograph from where you stand and call a licensed professional. How often a house should be checked is covered in how often to inspect.
What this page cannot tell you
Timings vary by house, state and company. Ask the inspector for an estimate of time on site and what areas will be included before you book.
Frequently asked questions
How long does a termite inspection usually take?
For an average house it is often one to two hours, depending on size, access and what is found. Small units can be quicker and large properties take longer.
Is a very short termite inspection a problem?
It can be. If the subfloor, roof void or other key areas were skipped without a reason, ask why and check that the limitations are listed in the report.
What can slow an inspection down?
Poor access, stored items against walls, a large or complex layout, and any evidence that has to be traced and recorded.
How can I prepare for an inspection?
Clear access to the roof void and subfloor, move items away from walls, and tell the inspector about past moisture issues or treatments.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Standards Australia. Australian Standards (AS 4349.3 timber pest inspection, AS 3660 termite management)
- Queensland Building and Construction Commission. Protect against termites: termite management systems and inspections
- Department of Health, Victoria. Pest control: termites