Reading a termite inspection report, section by section
Most reports hide the important line in the middle. Here is where to look first, and what the wording does and does not promise.
Start with the findings, not the summary
A termite inspection report usually opens with a summary and a risk rating. Read past it. The findings section is where the inspector says what was seen, where, and what could not be reached.
The rating is a judgement call. The findings are the evidence behind it.
What the main sections tell you
| Section | What it tells you |
|---|---|
| Scope and limitations | What was inspected, and what was not (roof void, subfloor, locked rooms) |
| Evidence found | Live activity, past damage or workings, with locations |
| Conducive conditions | Moisture, timber against soil, blocked vents, anything that invites activity |
| Recommendations | Further investigation, treatment by a licensed technician, or a re-inspection date |
"No evidence found" is not "no termites"
This is the line people misread most. It means nothing visible was found in the areas the inspector could reach on that day. It is not a guarantee about the rest of the house.
Termites work out of sight, inside walls and timber. A visual inspection cannot see through plasterboard, so the limitations section matters as much as the findings.
Check what was not inspected
Look for words like "restricted access" or "obstructed". A stored pile of boxes against a wall or a sealed subfloor hatch can hide the exact spot you most need checked. Ask for a follow-up if a key area was blocked.
If an area could not be reached, the report is silent about it. Silence is not clearance.
Active, previous or damage: three different findings
- Active: live termites were seen. This needs a licensed professional soon.
- Previous activity: workings or damage with no live termites on the day. It may be old, or the colony may have moved.
- Damage: timber that has been eaten, whatever the cause. It says nothing by itself about whether termites are still there.
What to do with a report that finds something
Do not break open the workings and do not spray anything. Disturbing a colony makes it abandon that route and re-enter somewhere hidden, and it destroys the evidence the inspector needs to trace the entry point.
Leave it exactly as it is and contact a licensed pest management technician. Treatment is a licensed job, using products registered by the APVMA. Who is allowed to do what is covered in licensed inspectors and technicians.
What this page cannot tell you
A report is only as good as its access and its inspector. For what the visual inspection covers in full, see timber pest inspection. If a finding affects a purchase or a claim, ask your conveyancer or insurer, not a guide.
Frequently asked questions
What does a termite inspection report include?
It normally lists the scope and limits of the inspection, any evidence of termites, borers or decay, conditions that favour activity, and the inspector's recommendations.
Does 'no evidence found' mean my house is termite free?
No. It means nothing visible was found in the areas that could be reached on that day. Termites often work hidden inside walls and timber.
What is the difference between active and previous activity?
Active means live termites were seen. Previous activity means workings or damage were found with no live termites on the day, so the colony may be gone or may have moved.
Should I try to treat what the report found?
No. Treatment is done by a licensed pest management technician using registered products. Disturbing the termites yourself can drive them deeper and destroy evidence.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Standards Australia. Australian Standards (AS 4349.3 timber pest inspection, AS 3660 termite management)
- Queensland Building and Construction Commission. Protect against termites: termite management systems and inspections
- Department of Health, Victoria. Pest control: termites