What termite inspectors look for, and why they check the places you skip
Inspectors almost never find a termite. They find the traces and the conditions that explain them.
Evidence first, insects last
An inspector is not hunting for live termites. Subterranean termites stay hidden inside timber and mud, so the job is to read what they leave behind. That means mud tubes, damaged timber, discarded wings and the odd patch of blistered paint.
Most of that evidence sits in places you rarely visit. A good inspection spends its time under floors, in roof voids and along the base of walls.
The six things on the checklist
- Mud tubes on piers, walls, slab edges and pipes. They are the covered roads termites use to cross open ground.
- Hollow or soft timber, found by tapping and probing skirting boards, door frames, window sills and accessible framing.
- Moisture, measured with a meter, because damp timber is what makes a spot attractive in the first place.
- Timber touching soil, such as stumps, posts, stored firewood and garden edging.
- Barrier condition, if the building has one: gaps, bridging by paving or render, and any sign the zone has been covered.
- Old repairs and patched areas, which can hide earlier activity.
The tools do more than the eye
A torch and a probe are standard. A moisture meter finds damp that cannot be seen. Many inspectors also use a thermal camera or an acoustic device to flag spots worth opening up.
These instruments point to a place. They do not confirm termites on their own. The inspector still has to look at the timber and decide what it means. Inspection instruments covers what each one can and cannot tell you.
What gets recorded as not inspected
This is the part of a report most people skip. If a subfloor is too tight to enter, or a wall is blocked by stored boxes, the inspector writes that down. That area was not cleared. It was simply not checked.
A report with several such notes is a partial answer. Ask whether a second visit is possible once access is fixed. The details of what a visual inspection includes are in what an inspection covers.
Why they notice conditions, not just damage
A leaking tap, a blocked drain pipe or poor subfloor ventilation does not show up as termite damage. It shows up as a reason termites might come. Inspectors note these because fixing the condition lowers the odds of a return visit.
If you are told the subfloor is damp, take it seriously even when no termites were found. Today's clear report does not protect next year's timber.
What you can do before they arrive
Clear access to the manhole, the subfloor hatch and the base of walls. Move stored items away from external walls. Tell the inspector about any past activity or treatment, and have records ready.
Then leave the building as it is. Do not scrape, spray or pull anything off a wall to show them. Disturbing evidence makes it harder to read and can push a colony somewhere less visible. The full list is in how to prepare for a pest inspection.
What the report cannot promise
An inspection is a snapshot of what was visible and reachable on one day. It is not a guarantee that the building is free of termites. A clear result means no evidence was found. It does not mean none exists.
Frequently asked questions
Do termite inspectors always find termites if they are there?
No. They find evidence in the areas they can reach on the day. Concealed activity inside walls or in blocked areas can be missed, which is why the report lists what was not inspected.
Will an inspector break open walls?
A standard visual inspection does not. They tap, probe and use instruments, and they recommend further investigation if something looks suspicious.
Should I treat anything I find before the inspector comes?
No. Leave it exactly as it is. Treating or disturbing evidence can scatter the colony and destroy what the inspector needs to see.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Queensland Building and Construction Commission. Protect against termites: termite management systems and inspections
- Department of Health, Victoria. Pest control: termites
- Standards Australia. Australian Standards (AS 4349.3 timber pest inspection, AS 3660 termite management)