Home › Barriers › Termite management system: what it is and what it needs

Termite management system: what it is and what it needs

A system reduces the risk of hidden entry. It does not make a house termite proof, and it needs inspecting.

A termite management system is a set of protections, not a guarantee

A termite management system is the method used to stop termites reaching a building unseen. It might be a physical barrier, a chemical soil barrier, a reticulation system, a baiting program, or a mix. It lowers the risk. It does not remove it.

Every system depends on being inspected on schedule. That is how the system does its job.

The main types

SystemWhat it doesWhat it needs
Physical barrierBlocks concealed entry with mesh, graded stone or capsInspection of the barrier zone for bridging
Chemical soil barrierTreated zone in the soil around and under the buildingRenewal when the product breaks down
Reticulation systemPipe network so the treated zone can be rechargedScheduled recharging by a technician
Baiting systemStations that take a slow-acting product back to the colonyMonitoring visits on a schedule

The notice in your meter box

The Building Code requires a durable termite management notice in a prominent place, usually the electrical meter box. It records the method, the date of installation, the life of any chemical component and the recommended inspection frequency.

No notice? Then you do not know what protects the house. A timber pest inspection can report on what is present and its condition.

What undermines any system

Bridging is the usual culprit. Garden beds above the slab edge, paths poured against the wall, or soil over weep holes can hide the zone the system relies on. None of them look like a mistake when they are built.

Moisture matters too. Leaks and poor drainage make a house more attractive, and no system fixes that for you. See moisture and the subfloor.

New house or old house

New buildings generally get a system at construction. Older houses may have none, or one that has expired. If the notice shows a chemical life that has run out, ask a licensed technician what is needed. Do not assume the old treatment still works.

Fitting or renewing a system is work for a licensed pest management technician using APVMA-registered products. It is not a weekend job.

Questions to ask your technician

  • Which system is in place, and when does it need attention?
  • Where exactly does it protect, and where does it not?
  • How often should the house be inspected?
  • Will I get an updated notice in writing?

Frequently asked questions

What is a termite management system?

It is the method used to stop termites reaching a building unseen, such as a physical barrier, a chemical soil barrier, a reticulation system or baiting. It lowers risk but does not remove it.

Where do I find my termite management notice?

Usually in the electrical meter box. It records the method, installation date, life of any chemical component and the recommended inspection frequency.

Does a termite management system mean I can skip inspections?

No. Every system depends on regular inspection. A licensed inspector checks for activity and for anything that bridges the system.

Sources

What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.

Keep reading